howto/wireguard.md
... ...
@@ -24,7 +24,7 @@ ListenPort = <YOUR_LOCAL_UDP_PORT>
24 24
[Peer]
25 25
PublicKey = <public_key_of_your_peer>
26 26
# at least one peer needs to provide this one
27
-Endpoint = <end_post_hostname_or_ip:port>
27
+Endpoint = <end_point_hostname_or_ip:port>
28 28
# in theory this could be restricted to dn42 networks,
29 29
# however it is easier to do this with iptables/bgp filters/routing table
30 30
# instead just like for openvpn-based peerings
... ...
@@ -48,7 +48,7 @@ $ ip link set <interface_name> up
48 48
49 49
Mic92 uses this [script](https://github.com/Mic92/bird-dn42/tree/master/wireguard) to automate this
50 50
51
-Maybe you should check the MTU to your peer with e.g. `ping -s 1472 <peer ip>`. If your output looks like `From gateway.local (192.168.0.1) icmp_seq=1 Frag needed and DF set (mtu = <MTU>)` substract `80` from the MTU and set it via `ip link set dev <interface_name> mtu <calculated_mtu>`
51
+Maybe you should check the MTU to your peer with e.g. `ping -s 1472 <end_point_hostname_or_ip>`. If your output looks like `From gateway.local (192.168.0.1) icmp_seq=1 Frag needed and DF set (mtu = <MTU>)` substract `80` from the MTU and set it via `ip link set dev <interface_name> mtu <calculated_mtu>`
52 52
53 53
## Testing
54 54